Strong Stain Resistance

Bonds physically and chemically to surface

Seals in Color

Rich color enhancement with a single coat!

VIVID For Stone

Solvent Free, Permanent Stone Enhancer

Product Info

Usage and Application

VIVID For StoneUSES: VIVID™ for Stone is an innovative low V.O.C. sealer and color enhancer for all natural stone including marble, limestone, saltillo clay tile and slate. VIVID is a specially formulated siloxane/silicone resin that is remarkably UV stable and will continue to have impressive performance for up to 20 years.

FEATURES: VIVID can be used in interior or exterior applications, and it provides excellent water repellency thereby cracking, mold, and mildew growth, and efflorescence. In addition to its water repellency it contains a Fluoropolymer that gives the surface excellent resistance to water and oil based stains. VIVID can be applied as an enhanced finish or gloss finish so it is an excellent choice for almost any enhancing application. It bonds both physically and chemically to the surface for long lasting protection and appearance, and it is vapor permeable (breathable) so it won’t crack, blister, or peel. 100% active solution so you use less

DIRECTIONS: Use only as directed. Before applying, it is recommended that preliminary tests be carried out to determine usage and to test the effectiveness of the treatment. Apply solutions as supplied to the surface using a soft lint free cloth, sponge, or microfiber pad. For an enhanced no gloss finish, apply one to two coats waiting 5 minutes between coats, after application allow product to dwell 10 minutes on surface and buff dry with a clean, lint free cloth. (It is important that the surface be buffed completely when seeking no gloss finish, any product remaining on surface after dwell time should be removed). For an enhanced gloss finish, apply 2 even coats waiting 5 minutes between coats and allow surface to dwell 10 minutes. After 10 minutes dwell time, apply a 3rd coat making sure finish is even and consistent and leave the surface to cure. Puddled or excess product should be removed before cure to ensure a consistent finish.

COVERAGE: Approximately 200– 2000 sq. ft. per gallon depending on surface porosity, density and desired finish

PRECAUTIONS: Do not spray apply product. Protect all adjacent surfaces from accidental contamination. Dispose of unwanted material according to State and Federal regulations.

SAFETY PRECAUTIONS: Long sleeves, gloves and eye protection should be worn during application. Should not be taken internally. Use in a well ventilated area. Can irritate skin and cause severe eye irritation. In the event of eye contact continuously rinse eyes for minimum of 15 minutes, if irritation persists seek medical attention.

Strong Stain Resistance

Strong Stain Resistance

Bonds physically and chemically to surface

Seals in Color

Seals in Color

Rich color enhancement with a single coat!

VIVID For Stone

VIVID For Stone

Solvent Free, Permanent Stone Enhancer

Technical Data

DESCRIPTIONVIVID For Stone

VIVID for Stone is a stable, VOC Compliant, 100% actives siloxanes/silicone resin blend that imparts water and stain repellency to substrates while providing and enhanced look. VIVID for Stone is produced in the USA, was developed to treat a wide variety of mineral substrates commonly used in the tile industry including tumbled marble, limestone, slate and saltillo clay tile.

Test application is recommended on surface to be treated to ensure compatibility and repellent result. Typical property values are not intended for use in the preparation of specifications. A test patch should be performed prior to general application with the customer’s approval to ensure the desired appearance is achieved.

Click here for VIVID For Stone VIVID For Stone Tech Data Sheet

Click here for VIVID For Stone VIVID Applications and Use Data Sheet

Click here for VIVID For Stone VIVID for Stone Safety Data Sheet

WARNINGS: Do not dilute or alter. Protect from freezing. Use eye protection and minimize skin contact with gloves and clothing. Protect all adjacent and non-targeted surfaces from contamination. Use in well-ventilated area away from sparks and open flame. Do not smoke in vicinity of application. Do not store or use near sparks or open flames.

USAGE: Can be used on all natural stone including marble, limestone, saltillo clay tile and slate.

APPLICATION:

Do not spray apply product. Surface should be free of standing water, dirt, dust, oils & other contaminants. VIVID for Stone should be applied as supplied to achieve the desired application effect. One to two coats of the solutions should be applied to achieve an enhanced appearance. Two to three coats of the solution should be applied to achieve an enhanced appearance with gloss. Method: Apply with soft, lint-free cloth, sponge, or paint brush. Excess material should be removed to prevent inconsistencies in the enhancement.

Surface Preparation:

Surface preparation depends on substrate placement, type and strength, curing and finishing processes, age, condition, previous contamination and the presence of existing coatings as well as the application of VIVID for Stone. Surfaces should be clean from dust, dirt, oils, grease, cutting compounds, other coatings, efflorescence and laitance before applying VIVID for Stone.

DRY TIME:

VIVID for Stone should be fully cured within 24 hours

CLEAN UP:

Thoroughly rinse application equipment with solvent.

STORAGE:

One (1) year shelf life-unopened. VIDID for Stone must be stored in tightly closed containers, protected from sunlight and stored at temperatures between 32°F (0°C) and 100°F (38°C).

COVERAGE:

200– 2000 sq ft per gallon depending on surface porosity, density and desired finish.

Bonds physically and chemically to surface

Strong Stain Resistance

Strong Stain Resistance

Rich color enhancement with a single coat!

Seals in Color

Seals in Color

Solvent Free, Permanent Stone Enhancer

VIVID For Stone

VIVID For Stone

Contact Us

For a sample bottle of VIVID For Stone please email us and be sure to provide
your complete mail address and phone (optional).

info@vividforstone.com